WinTV v8/v8.5 Release notes wintv85setup_37351.exe - Added the new Windows driver for the WINtv-hvr-930C (model 16xxx) wintv85setup_37122.exe May 2, 2019 - Simplified the Set Top Box setup page for HD PVR 2. - Added Retro Game Console/VCR wizard page on HD PVR 2 setup - When selecting Game Console wizard page, only showing HDMI - Using actual product name on HD PVR 2 setup wizard page - When going to Settings -> Devices, auto selecting the first entry, so the Tuner Setup button is enabled rather than greyed out - Fixed issue with channels in Malaysia and Ghana - Compacting of the database at TVServer start is now done from inside DBCheck.exe rather than compact.bat, which creates it's own log in case of issues in the field. - Web download size optmised 110Mb -> 101Mb - Changed to ignore duplicate channels if the quality is the same rather than just better quality. - Next button has focus during scanning not Cancel wintv85setup_37101.exe April 11, 2019 - better checking for anti-virus software blocking the installation and running of the WinTV v8.5 app - you no longer need to reenter the Activation Code when installing a new WinTV v8.5 version on the same PC WinTV 8.5.37086 - Fixed an issue when channels move frequency on ATSC Repack, but rescanning still shows "No Signal". - Added logging to Extend. - Fixed installation and run time issues caused by certain anti-virus applications. - Fixes issues where access to some of the essential WinTV folders are blocked by anti-virus applications. wintv85setup_36345.exe https://s3.amazonaws.com/hauppauge/wintv8/wintv85setup_36345.exe https://s3-eu-west-1.amazonaws.com/hauppauge-eu/wintv8/wintv85setup_36345.exe - Changed 3500 to fix issue with transmitter in Germany which required extra time to get the ServiceInformation. - Fixed an issue where the ServiceInformation from a previous frequency could still be used to tune on a future frequency (if there were no valid locked inbetween) causing channels to be skipped in some very rare cases. - Fixed an issue with WinTV-MiniStick or PCTV-7x sticks not being detected correctly. - Now matching wild card for season recordings. Now a season recording for "Top Gear" will also record "Top Gear: Polar Challenge" or where there are episode numbers in the title - Fixed falsely showing update message on WinTV v8.5 US - Fixed a crash starting an Analog Scan if the device graph failed to run due to bad hardware - Updated WinTV-soloHD/dualHD driver 5.2018.1107.36317 also fix BSOD on PCTV 461e wintv85setup_36284.exe October 22, 2018 https://s3.amazonaws.com/hauppauge/wintv8/wintv85setup_36284.exe https://s3-eu-west-1.amazonaws.com/hauppauge-eu/wintv8/wintv85setup_36284.exe - Supports multiple USB-Live2 USB devices and mulitple ImpactVCB boards - Fixed an issue when moving channels in the Settings page, only single scheduled recordings were updated, recurring ones were left on the old channel number - Fixed an issue displaying the EPG info on the Details page where some of the end text was being cropped. - Fixed an issue where there could be an exception if a board wasn't found correctly at startup in 8.5.36269 - Hiding Internet Assisted Lookup on ATSC due to changes in frequencies by broadcasters - Updated hcw85bda driver to fix some issues on WinTV-quadHD (1.59.36248) - Updated WinTV-soloHD/dualHD driver to fix an issue with Windows Core Isolation / Memory Integrity. (5.2018.1002.36278) wintv85setup_36269.exe October 4, 2018 - WinTV-quadHD updates: - Fixed an issue with the recent changes that could cause the Tuner Setup button to be disabled on a second tuner in the list after the WinTV-quadHD - Now supporting multiple WinTV-quadHD tuners as well as ability to mix WinTV-quadHD with other tuners. Previously the wizard would only show for the quadHD when multiple products were in the PC. WinTV-quadHD now works nicely with other tuners plugged in. - Fixed logic to add the extra channel mappings on WinTV-quadHD, this would fail if there was more than one board in the PC - HauppaugeTVServer updated for WinTV-quadHD to fix issues starting four recordings at exactly the same time. - Fixed an issue which could cause the Wizard to appear each run - Fixed an issue where pressing minus button the scheduler end time hours would give the duration a large value but then going forward again would just increase the large value. - Made Details box wider to accomodate German translations. - Added support for in Settings.xml (default 3000ms still) - Added support for in Settings.xml This allows you to make the app wait AFTER tvservices has started corrrectly. - Showing the HDCP Support message only when HDCP is not available. - Fix serial number checking on WinTV-Starburst and WinTV-DCR products - Wizard launched from Settings page by MAC/Serial not by List Index (fixes an issue with the hidden WinTV-quadHD device) - There is also an updated SDK based on this version. wintv85setup_36227.exe August 15, 2018 - Added a note on the Activation code entry page to warn users to be careful when typing Z or 2 to try and help avoid users typing the wrong key - Activation codes can be entered with or without the dashes and still work. - Fixed an error when pressing Control + D for stream details - Fixed an exception when checking for Updated software - Fixed an issue with DCR-2650 not working because it had a made up serial number which was being deleted by the recent fix to get real serial numbers from a bunch of boards. - Added Service type 0x19 to the logic for Malaysia, so the HD channels are fixed up as well as the SD ones.# - Fixed need for FreenetFW reg key during Check for Updates in Retail version of the app. - Fixed no Audio on DVB-T2 channels in Malaysia, channels were detected with type 0x16 (HE-AAC) not 0x1019 (AAC) - Added support for the 4x3 Aspect Ratio used in Malaysia, it was defaulting to stretching it to 16:9 incorrectly. WinTV85setup_36190.exe July 10, 2018 - Activation key no longer needs dashes when entering the code - Allowing LAV and Microsoft DTV Audio Decoder to be used for AAC and loaded into the Decoder list (to fix an issue in certain regions of Germany on one channel) - Submitted WinTV Activation Servers to Norton SafeWeb, and is now marked as safe. - Fixed an issue detecting the original HD PVR WinTV 8.5.36137 May 17, 2018 - Due to new Privacy settings in Windows 10 (Windows 10.0.17133 or higher), if TV product was not detected, will show the box to get the user to turn Camera on to allow setup to run. - Hide all channels with "(Internet)" in the name. - Updated satellites.xml for Singapore satellite TV - Fixed issue that if TV tuner product was not detected first time, when it was detected on fallback attempt, Serial would show as 2 - Updated soloHD/dualHD driver with placeholder for new 461e PID - Hiding Picture in Picture Context menu when Picture in Picture is disabled - Removed stray Progress Message box in installer - Removed I2C method on Starburst and Starburst2 for serial number checking. - Tidied up the exception that gets logged if the CI DLL isn't present, to avoid looking like an error - Updated CaptureHDPVR to get real serial number from HD PVR 2 / Colossus2 - Updated copyright messsage - Changed HE-AAC and AAC logging message to no longer be hard coded for HE-AAC for both. - Now deleting the slip files after channel change. The last slip file was always being left behind as it was still in use - Updated HCWTSReader and HCWTSWriter, deletes and blanks the files if they can't be deleted. WinTV 8.5.36081 March 22, 2018 - New support for the PCTV 461e. Updated driver 5.2017.0911.36075 to support new PID 0461 of the PCTV 461e. Fixed an issue with PCTV461e newer revisions not finding DVB-S2 channels. Removed support for PCTV 521e to allow the PCTV 461e to function correctly - Fixed an issue with HEVC channels with AAC audio not giving audio in the last few builds - RestartTVServer now actively sets the service start type from disabled -> auto - WinTV will now try and restart TVServer if it finds the service disabled when it starts. The app will then work correctly next run. Showing a nice message to inform the user so. - WinTV Extend now works for live HEVC HD channels used in Germany - Removing old instance of soloHD/dualHD from hcwBoards and hcwDevices where the serial number was 720897 (000DFEB0001) - will be detected under the real serial number now. - Hiding Edit button on Season record. When editing this, it would turn it into a Daily Recurring recording, not a season recording and would be editing the UTC time rather than local time and lead to recordings happening at the wrong time. - Fixed an issue where all recurring recordings should show as "Season" on the icon. Now showing Daily,Weekly or Season as appropriate - Not allowing recording of encrypted channels and showing OSD message when user attempts to - If only a single source is present in the wizard - tick this source automatically to save a click during the Wizard. - Now showing Serial/MAC Address accoding to the type it has, we were previously always showing "MAC" even if the device had a serial number. - Fixed an issue with there being no EPG data if the Data Directory had been set to certain locations. WinTV v8.5 Version 36050 Feb 19, 2018 - updates to the Hauppauge TV server to fix crashes affecting long trm recordings - screen saver is now allowed during a scheduled recording when WinTV might be closed - for ATSC TV, the main menu now shows 'Close Captions' instead of 'Subtitle Stream' WinTV v8.5 Version 35313 Nov 20, 2017 - Fixed an issue with setup failing on HVR-935 (111xxx sticks) - Fixed an issue with hcw85 CIR driver not being installed WinTV v8.5 Version 35290 Oct 17, 2017 - Fixed an issue with installer crashing on run on certain products (updated hcwi2c32.dll) - Disabled Separate Analog Capture filter on USB-Live2 to avoid issue with Microsoft Cortana - Updated signal monitor tool - Fixed issue with solo/dual HD newer driver not being included - fixed connection issue with Extend WinTV v8.5 Version 35270 Sept 25, 2017 - Updated WinTV-NOVA-HD-USB2 to driver 1.36.35264 to work with the latest NOVA models - Updated WinTV-solo/dualHD driver 5.2017.911.35255 - Updated WinTV-HVR-955Q driver 6.0.119.35268 to fix issue with Cortana locking the WinTV tuner for use with "Hey Cortana" function - Adds support for WinTV-dualHD ATSC Bulk PID 826D (fixes bug which caused the second tuner not to work) - Add WinTV components reversioned for SDK release WinTV v8.5 Version 35173 June 22, 2017 - Fixes issue with slow boot on WinTV-quadHD and WinTV-HVR-5525 (and potentially other 885/888 based products) - Supports newer WinTV-dualHD sticks (programmed as Bulk mode devices) - New driver for WinTV-soloHD and WinTV-dualHD - Supports new model WinTV-NOVA-HD-USB2 WinTV v8.5 Version 35126 May 7, 2017 - Primariy for use in Europe with better support for DVB-T2 - This version requires an activation key. You cannot activate this version with a WinTV v7 or v8 CD-ROM. WinTV v8 Version 35097 April 7, 2017 - Includes fix for the bug which made the IR remote control intermittant on the WinTV-quadHD - Faster download. .Net installer now the web version rather than the full version. - Updated UK scanning tables for DVB-T/T2 - Updated translations for the installer - Fixed HD channels in Australia where they would give blank screens - Updated UK satellite scan tables - Updated Germany satellite and DVB-C scan tables