Support: Running WinTV TV tuners and HD PVR 2 under Linux
Ubuntu support for Hauppauge TV tuners
Hauppauge technical support has been testing various Hauppauge TV tuners with Ubuntu Desktop, and has created both a video and a list of steps to install the TV tuners on Ubuntu Desktop 14.04.2. If you have any questions, you can contact Hauppauge support at: firstname.lastname@example.org
Ubuntu installation video
Ubuntu installation instructions
Linux drivers for Hauppauge TV tuners
This Linux driver package is for the WinTV-HVR-955Q, the WinTV-HVR-1955 and HVR-1975, plus all versions of the WinTV-HVR-2255 and HVR-2205 on Ubuntu Desktop 14.04.2 with kernel 3.16
Updated kernel patch for 3.19 on Ubuntu Desktop 14.04.3
Note: Ubuntu Desktop 14.04.4 includes kernel 4.2 with built in support for the WinTV-HVR-955Q. So there is no need to compile your own kernel.
Running the HD PVR 2 under Ubuntu
Ubuntu installation video
Ubuntu installation instructions for the HD PVR 2
Linux package for the HD PVR 2, including the source code for the recording application
Note: Please check on the bottom of your HD PVR 2 for the 6 digit 157xxx model number. Download the correct package for your model below.
Raspberry Pi Support for Hauppauge TV tuners
Hauppauge technical support has been testing with the Raspberry Pi Model B+, not the current Raspberry Pi 2. All performance should be increased with newer model of the Raspberry Pi.
Raspbian Jessie The current version of Raspbian Jessie comes with Kernel 4.1 and it already includes support for the Hauppauge WinTV-HVR-955Q.
Raspbian can be downloaded from https://www.raspberrypi.org/downloads/raspbian/
Please check the Raspberry Pi community on how to install and run an operating system on the Raspberry Pi.
All you need to do is connect the WinTV-HVR-955Q to a USB port on the Raspberry Pi.
You will also need the firmware which is not included with Raspbian Jessie. You can download the Conexant cx231xx USB firmware v4l-cx231xx-avcore-01.fw for the WinTV-HVR-955Q from Linuxtv.org http://linuxtv.org/downloads/firmware/#conexant You will need to copy the firmware file to /lib/firmware and reboot the system. That is all you need to load the TV tuner firmware and get the WinTV-HVR-955Q device detected.
The current version of OpenELEC 6.0.1 Kernel also has support out of the box for the WinTV-HVR-955Q.
OpenELEC can be downloaded from http://openelec.tv/get-openelec
Please check the OpenELEC community on how to install and run an operating system on the Raspberry Pi.
All you need to do is connect the HVR-955Q to a USB port on the Raspberry Pi.
The firmware is already included nothing else needs to be done to get the HVR-955Q detected.
Satellite TV for your Raspberry Pi
Use the PCTV 461e Satellite TV receiver with your Raspberry Pi. Here is a video on how to install the drivers and how to use Kaffeinewww.youtube.com/watch?v=dsRn9CLXCJo